Come and See Us At The 2025 Portland House & Outdoor Living Show!
April 4th – 6th at the Oregon Convention Center
800 Series
The 800 Series Industrial Aluminum garage doors are strong, attractive and can provide maximum visibility when required. Fire Stations and Auto Service Centers are two example applications. Door frames come standard with a mill finish, Class II Clear or #602 Bronze Anodized finishes are optional. Standard glass is 1/8″ clear annealed glass. Most other architecturally specified finishes and glass types are available upon request.Contact us about this product
General Information
- Frame: 2" thick extruded aluminum 6063-T5
- Section Joints: Tongue and Groove Joints with compressible foam gasket between
- Top & Bottom Rail overall widths: 5-7/8" (5-1/2" on face)
- Meeting Rail overall width combined: 4-3/16" (3-1/2" on face)
- End Stile overall width: 5-7/8" (5-1/2" on face)
- Center Stile overall width: 3-1/4" (2-1/2" on face)
- Panels: .050 thick (smooth), .040" thick (stucco embossed), 1/2" Polyurethane Insulated
- Glass: As specified by customer (up to 1/2" overall thickness)
- Bottom weather seal: U-shape loop type vinyl
- Finishes: Mill finish is standard, Class II clear, #602 bronze anodized, and most other finishes as specified are optional
- 1 Year Limited Warranty
- Warranty available HERE
Standard Widths
8'-2", 9'-2", 10'-2", 12'-2", 14'-2", 16'-2", 18'-2", 20'-2", 22'-2", 24'-2"
Standard Heights
8'-1", 9'-1", 10'-1", 12'-1", 14'-1", 16'-1"
Hardware
15" radius torsion hardware; track is 2" hemmed and bracket mounted. 3" track supplied when required by weight. Heavy duty steel rollers, non corrosive door fixtures and 14 gauge graduated hinges are standard. Double end hinges and long stem rollers are included on doors over 16'-2" wide or as required by weight. U-shaped galvanized struts are supplied on doors over 14'-2" wide or as required by weight to keep the door rigid. All doors are standard with interior slide bolt lock.
1/4" Mirropane
1/4" Plexiglass
1/4" Polycarbonate
1/8" Bronze
1/8" Clear
1/8" Gluechip
1/8" Gray
1/8" Greylite #31
1/8" Mistlite
1/8" P516 Obscure
1/8" Acrylic
1/8" Polycarbonate
1/8" Satin Etch
1/2" Insulated Clear
7/32" White Diffused Laminated
.050” Thick, Clear Anodized Aluminum
.25” Thick, White Corrugated Aluminum
.040” Thick, Mill Finish Stucco Embossed Aluminum
1” Thick, Polystyrene Insulated White Aluminum
.0625” Thick, 1”x.5” Diamond, .25” Stagger, 63% OA Expanded Mill Finish aluminum
.0625” Thick, .5” Dia. Holes, .6875” Stagger, 48% OA Perforated Mill finish Aluminum
.125” Thick, .25” Dia. Holes, .375” Stagger, 40% OA Perforated Mill finish Aluminum
.0625” Thick, .0625” Dia. Holes, .09375” Stagger, 41% OA Perforated Mill finish Aluminum
Clear Anodize
Dark Bronze Anodize
Black Anodize
Light Ash
Dark Ash
Light Cherry
Dark Cherry
Light Fir
Dark fir
Mahogany
Dark Walnut
Recommended Options
25,000, 50,000 or 100,000 Cycle Torsion Springs
Insulated Glass
Other Options
- 25,000, 50,000 and 100,000 Cycle Torsion Springs
- Single Pane and Insulated Glass Options (if selected, link to Glass Option selection)
- Lift Options
- Low Clearance
- High Lift
- Vertical Lift
- Angle Mounted Track
- 3” Track/Rollers
- Double End Hinges and Long Stem Rollers (when not standard)
- Chain Hoist, Reduced Drive (when not standard)
- Powder Coated Hardware (if selected enlarge photo of Powder Coated Hardware)